Cisco Catalyst 2900 Series XL Hardware Installation Guide

2-11
Catalyst 2900 Series XL Hardware Installation Guide
78-6461-03
Chapter 2 Installation
Installing the Switch in a Rack
Attaching the Brackets to a Catalyst 2912 XL, 2924C XL, 2924 XL,
2912MF XL, or 2924M XL Switch
Follow these steps to attach the brackets to a Catalyst 2912 XL, 2924C XL, 2924
XL, 2912MF XL, or 2924M XL switch:
The bracket orientation and screws that you use depend on whether you are
attaching the brackets for a 19-, 23-, or 24-inch rack. Use two of the supplied
screws to attach each bracket, according to rack size:
• For a 19-inch rack, use the supplied Phillips flat-head screws to attach the
long side of the bracket to the switch.
• For a 23- or 24-inch rack, use the supplied Phillips truss-head screws to attach
the short side of the bracket to the switch.
Figure 2-3, Figure 2-5, Figure 2-6, Figure 2-7,andFigure 2-8 show how to attach
a bracket to one side of the switch. Follow the same steps to attach the second
bracket to the opposite side of the switch.

Cisco Catalyst 2900 Series XL Specifications

General

Brand	Cisco
Model	Catalyst 2900 Series XL
Category	Switch
Language	English