Cisco Catalyst 2900 Series XL - Attaching the Cisco RPS (Model PWR300-AC-RPS-N1

C-3
Catalyst 2900 Series XL Hardware Installation Guide
78-6461-03
Appendix C Translated Safety Warnings
Attaching the Cisco RPS (model PWR300-AC-RPS-N1)
Attaching the Cisco RPS (model
PWR300-AC-RPS-N1)
This warning applies to the Catalyst 2912 LRE XL and 2924 LRE XL switches.
Warning Attach only the Cisco RPS (model PWR300-AC-RPS-N1) to the RPS
receptacle.
Waarschuwing:
Slechts de Cisco RPS (model PWR300-AC-RPS-N1) aan de RPS
contactdoos verbinden.
Varoitus
Kiinnitä RPS-vastakappaleeseen vain Cisco RPS (malli
PWR300-AC-RPS-N1).
Avertissement :
Raccordez le bloc d'alimentation Cisco RPS (modèle
PWR300-AC-RPS-N1) uniquement au connecteur RPS
Warnung:
An die RPS-Steckhülse darf nur das Cisco RPS (Modell
PWR300-AC-RPS-N1) angeschlossen werden.
Avvertenza.
Collegare soltanto il Cisco RPS (modello PWR300-AC-RPS-N1)
alla presa RPS.
Advarsel!
Koble bare Cisco RPS (modell PWR300-AC-RPS-N1) til
RPS-stikkontakten.
Aviso
Anexe o RPS Cisco (modelo PWR300-AC-RPS-N1) apenas ao
receptáculo RPS.
Aviso:
Sólo conecte el Cisco RPS (modelo PWR300-AC-RPS-N1) al
receptáculo RPS.
Varning!
Koppla endast Ciscos RPS (modell PWR300-AC-RPS-N1) till
RPS-uttaget.