Cisco Catalyst 2960-CX User Manual

APPENDIX A
Technical Specifications
This appendix contains these topics:
•
Environmental Specifications, page 55
•
Physical Specifications, page 55
•
Power Requirements, page 56
•
PoE Power Consumption, page 58
Environmental Specifications
Environmental Ranges
40°C for Catalyst 3560CX-12PD-S and 3560CX-8XPD-S switches and 45°C
for all the other switches
For Catalyst 3560CX-8XPD-S, the maximum operating temperature
will be 35°C when installed inverted and under fully loaded conditions
(maximum PoE and 10G SFP+ transceivers installed).
Note
Operating temperature
-22 to 158°F (-30 to 70°C) up to 15,000 ft (4573 m)Storage temperature
5 to 95% (noncondensing)Relative humidity
Up to 10,000 ft (3000 m)Operating altitude
Up to 15,000 ft (4500 m)Storage altitude
Physical Specifications
Weight
5.0 lb (2.27 kg)Catalyst 3560CX-8PC-S
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
55

Cisco Catalyst 2960-CX Specifications

General

PoE	No
DRAM	512 MB
MAC Address Table Size	16, 000 entries
Stacking	No
Model	Cisco Catalyst 2960-CX
Ports	8 x 10/100/1000 Ethernet ports
Uplink Interfaces	2 x 1G SFP
Power Input	100 to 240 VAC
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-25°C to 70°C (-13°F to 158°F)
Power Consumption	15W
Relative Humidity	10 to 95% noncondensing