Cisco Catalyst 2960-X Configuration Guide

I
IEEE power classification levels 84
interface 80, 95
interfaces 44
auto-MDIX, configuring 44
internal power supplies 79
See power supplies 79
inventory management TLV 55
L
LLDP 53, 57, 58, 59
transmission timer and holdtime, setting 59
configuring 57
default configuration 57
enabling 58
overview 53
switch stack considerations 53
LLDP-MED 54, 61
configuring 61
TLVs 61
overview 54
supported TLVs 54
location TLV 55
M
MAC/PHY configuration status TLV 53
management address TLV 53
managing 79
monitoring 87
monitoring power 92
MTU 73, 74
system 73, 74
system jumbo 73, 74
system routing 73, 74
N
network policy TLV 55
P
PoE 17, 83, 84, 86, 87, 92
auto mode 86
CDP with power consumption, described 84
CDP with power negotiation, described 84
Cisco intelligent power management 84
PoE (continued)
devices supported 17, 83
high-power devices operating in low-power mode 84
IEEE power classification levels 84
monitoring 87
monitoring power 92
policing power consumption 92
policing power usage 87
power management modes 86
power negotiation extensions to CDP 84
powered-device detection and initial power allocation 84
standards supported 84
static mode 86
supported watts per port 17, 83
policing power consumption 92
policing power usage 87
port description TLV 53
port VLAN ID TLV 53
power management modes 86
power management TLV 55
power negotiation extensions 84
power negotiation extensions to CDP 84
power supply 79
configuring 79
managing 79
powered-device detection and initial power allocation 84
R
routing 48
S
See Ethernet management port 47
See power supplies 79
standards supported 84
static mode 86
statistics 80, 95
interface 80, 95
supported features 49
supported watts per port 17, 83
system 73, 74
system capabilities TLV 53
system description TLV 53
system jumbo 73, 74
system MTU 74
system name TLV 53
system routing 73, 74
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
IN-2 OL-29420-01
Index

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g