Cisco Catalyst 2960-X Configuration Guide

SUMMARY STEPS
1.
configure terminal
2.
define interface-range macro_name interface-range
3.
interface range macro macro_name
4.
end
5.
show running-config | include define
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Defines the interface-range macro, and save it in NVRAM.
define interface-range macro_name
interface-range
Step 2
•
The macro_name is a 32-character maximum character string.
Example:
Switch(config)# define interface-range
•
A macro can contain up to five comma-separated interface
ranges.
enet_list gigabitethernet1/0/1 - 2
•
Each interface-range must consist of the same port type.
Before you can use the macro keyword in the interface
range macro global configuration command string, you must
use the define interface-range global configuration command
to define the macro.
Note
Selects the interface range to be configured using the values saved in
the interface-range macro called macro_name.
interface range macro macro_name
Example:
Switch(config)# interface range macro
Step 3
You can now use the normal configuration commands to apply the
configuration to all interfaces in the defined macro.
enet_list
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Shows the defined interface range macro configuration.show running-config | include define
Example:
Switch# show running-config | include
Step 5
define
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
28 OL-29420-01
Configuring Interface Characteristics
Configuring and Using Interface Range Macros

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g