Contents
xxxii
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Downloading a Configuration File By Using RCP B-16
Uploading a Configuration File By Using RCP B-17
Clearing Configuration Information B-18
Clearing the Startup Configuration File B-18
Deleting a Stored Configuration File B-18
Working with Software Images B-18
Image Location on the Switch B-19
tar File Format of Images on a Server or Cisco.com B-19
Copying Image Files By Using TFTP B-20
Preparing to Download or Upload an Image File By Using TFTP B-20
Downloading an Image File By Using TFTP B-21
Uploading an Image File By Using TFTP B-23
Copying Image Files By Using FTP B-23
Preparing to Download or Upload an Image File By Using FTP B-24
Downloading an Image File By Using FTP B-25
Uploading an Image File By Using FTP B-26
Copying Image Files By Using RCP B-27
Preparing to Download or Upload an Image File By Using RCP B-28
Downloading an Image File By Using RCP B-29
Uploading an Image File By Using RCP B-31
APPENDIX
C Unsupported CLI Commands in Cisco IOS Release 12.1(19)EA1 C-1
Access Control Lists C-1
Unsupported Privileged EXEC Commands C-1
ARP Commands C-1
Unsupported Global Configuration Commands C-1
Unsupported Interface Configuration Commands C-1
FallBack Bridging C-2
Unsupported Privileged EXEC Commands C-2
Unsupported Global Configuration Commands C-2
Unsupported Interface Configuration Commands C-2
HSRP C-3
Unsupported Global Configuration Commands C-3
Unsupported Interface Configuration Commands C-3
Interface Configuration Commands C-4
IP Multicast Routing C-4
Unsupported Privileged EXEC Commands C-4
Unsupported Global Configuration Commands C-4
Unsupported Interface Configuration Commands C-5
To Next Page
Loading...
Need help?
General
