Cisco Catalyst 3550 Series User Manual

33-9
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Chapter 33 Configuring Web Cache Services By Using WCCP
Monitoring and Maintaining WCCP
Monitoring and Maintaining WCCP
To monitor and maintain WCCP, use one or more of the privileged EXEC commands in Table 33-2:
Table 33-2 Commands for Monitoring and Maintaining WCCP
Command Purpose
clear ip wccp web-cache Removes statistics for the web-cache service.
show ip wccp web-cache Displays global information related to WCCP.
show ip wccp web-cache detail Displays information for the switch and all cache engines in the
WCCP cluster.
show ip interface Displays status about any IP WCCP redirection commands that are
configured on an interface; for example, Web Cache Redirect is
enabled / disabled.
show ip wccp web-cache view Displays which other members have or have not been detected.

Cisco Catalyst 3550 Series Specifications

General

Form Factor	Rack-mountable
Manageable	Yes
RAM	64 MB
Device Type	Switch
MAC Address Table Size	12000 entries
Routing Protocol	RIP
Features	VLAN support
Power Supply	AC 120/230 V (50/60 Hz)
Ports	24 or 48 x 10/100Base-TX, 1 x GBIC, 2 x 10/100/1000Base-T
Operating Temperature	32 to 113°F (0 to 45°C)