Cisco Catalyst 3550 Series User Manual

31-64
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Chapter 31 Configuring IP Unicast Routing
Configuring BGP
You can also enable the logging of messages generated when a BGP neighbor resets, comes up, or goes
down, by using the bgp log-neighbor changes router configuration command.
show ip bgp neighbors [address] Display detailed information on the BGP and TCP connections to
individual neighbors.
show ip bgp neighbors [address] [advertised-routes |
dampened-routes | flap-statistics | paths
regular-expression | received-routes | routes]
Display routes learned from a particular BGP neighbor.
show ip bgp paths Display all BGP paths in the database.
show ip bgp peer-group [tag] [summary] Display information about BGP peer groups.
show ip bgp summary Display the status of all BGP connections.
Table 31-13 IP BGP Clear and Show Commands (continued)
Command Purpose

Cisco Catalyst 3550 Series Specifications

General

Form Factor	Rack-mountable
Manageable	Yes
RAM	64 MB
Device Type	Switch
MAC Address Table Size	12000 entries
Routing Protocol	RIP
Features	VLAN support
Power Supply	AC 120/230 V (50/60 Hz)
Ports	24 or 48 x 10/100Base-TX, 1 x GBIC, 2 x 10/100/1000Base-T
Operating Temperature	32 to 113°F (0 to 45°C)