Index
IN-17
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
flow control 10-15
management 1-7
monitoring 10-19
naming 10-17
physical, identifying 10-7
range of 10-8
restarting 10-22
shutting down 10-22
supported 10-7
types of 10-1
interfaces range macro command 10-10
Interior Gateway Protocol
See IGP
Interior Gateway Routing Protocol
See IGRP
interior routes, IGRP
31-24
internal BGP
See IBGP
internal neighbors, BGP
31-48
Internet Control Message Protocol
See ICMP
Internet Group Management Protocol
See IGMP
Inter-Switch Link
See ISL
inter-VLAN routing
1-6, 31-2
Intrusion Detection System
See IDS
inventory, cluster
6-24
IOS File System
See IFS
ip access-group command
28-21
IP ACLs
applying to an interface
28-19
extended, creating 28-11
for QoS classification 29-7
implicit deny 28-10, 28-14, 28-16
implicit masks 28-10
logging 28-16
named 28-15
standard, creating 28-9
undefined 28-21
virtual terminal lines, setting on 28-19
IP addresses
candidate or member
6-4, 6-16
classes of 31-5
cluster access 6-2
command switch 6-3, 6-13, 6-16
default configuration 31-4
for IP routing 31-4
MAC address association 31-8
monitoring 31-17
redundant clusters 6-13
standby command switch 6-13, 6-16
See also IP information
IP broadcast address
31-15
ip cef command 31-76
IP directed broadcasts 31-13
ip igmp profile command 20-22
IP information
assigned
manually
4-10
through DHCP-based autoconfiguration 4-3
default configuration 4-3
IP multicast routing
addresses
all-hosts
34-1
all-multicast-routers 34-1
all-PIM-routers 34-10
Cisco-RP-Announce 34-8
Cisco-RP-Discovery 34-8
host group address range 34-1
administratively-scoped boundaries, described 34-42
and IGMP snooping 20-1, 20-6
Auto-RP
adding to an existing sparse-mode cloud
34-19
benefits of 34-18
clearing the cache 34-58
To Next Page
Loading...
