Cisco Catalyst 6500 Series Command Reference

2-77
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
show ssl-proxy stats
show ssl-proxy stats
To display information about the statistics counter, use the show ssl-proxy stats command.
show ssl-proxy stats [type]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Usage Guidelines The type values are defined as follows:
• content—Displays content scan object statistics.
• context—Displays context statistics information.
• crypto—Displays crypto statistics.
• fdu—Displays FDU statistics.
• hdr—Displays HTTP header insertion statistics.
• ipc—Displays IPC statistics.
type (Optional) Information type; valid values are content, context, crypto, fdu,
hdr, ipc, module, pki, service, ssl, tcp, and url. See the “Usage
Guidelines” section for additional information.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 1.2(1)
The output of the show ssl-proxy stats command was changed to
include information about the session allocation failure and session
limit-exceed table.
SSL Services Module
Release 3.1(1)
This command was changed to add the following keywords:
• content
• context
• hdr
• module module
• url

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English