Cisco Catalyst 6500 Series Command Reference

2-2
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
clear ssl-proxy conn
clear ssl-proxy conn
To clear all TCP connections on the entire system, use the clear ssl-proxy conn command.
clear ssl-proxy conn [context name [module [module]]][service name [context name [module
[module]]]]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to clear the connections for the specified service:
ssl-proxy# clear ssl-proxy conn service S6
This example shows how to clear all TCP connections on the entire system:
ssl-proxy# clear ssl-proxy conn
ssl-proxy#
context name (Optional) Clears the connections for a specific context.
module module (Optional) Clears the connections for the specified module type.
The available options for the module variable are as follows:
• all—All CPUs
• fdu—FDU CPU
• ssl1—SSL1 CPU
• tcp1—TCP1 CPU
• tcp2—TCP2 CPU
service name (Optional) Clears the connections for the specified service.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 3.1(1)
This command was changed to add the following keywords:
• context name
• module module

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English