Cisco Catalyst 6500 Series - Configuring Bridging Parameters and ARP Inspection; Customizing the MAC Address Table

2-93
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
ssl-proxy crypto key unlock rsa
ssl-proxy crypto key unlock rsa
To unlock the key automatically after a reload, use the ssl-proxy crypto key unlock rsa command.
ssl-proxy crypto key unlock rsa key-name passphrase passphrase
Syntax Description
Defaults This command has no default settings.
Command Modes Global configuration
Command History
Examples This example shows how to unlock the keys automatically after a reload:
ssl-proxy(config)# ssl-proxy crypto key unlock rsa pki1-72a.cisco.com passphrase cisco1234
ssl-proxy(config)#
key-name Name of the key.
passphrase Pass phrase.
Release Modification
SSL Services Module
Release 3.1(1)
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.