Cisco Catalyst 6500 Series Command Reference

2-39
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
policy ssl
policy ssl
To enter the SSL-policy configuration submode, use the policy ssl command. In the SSL-policy
configuration submode, you can define the SSL policy for one or more SSL-proxy services.
policy ssl ssl-policy-name
Syntax Description
Defaults The defaults are as follows:
• cipher is all-strong.
• close-protocol is disabled.
• session-caching is enabled.
• version is all.
• session-cache size size is 262143 entries.
• timeout session timeout is 0 seconds.
• timeout handshake timeout is 0 seconds.
• cert-req empty is disabled.
• tls-rollback is disabled.
• renegotiation is disabled.
Command Modes Context subcommand mode
Command History
ssl-policy-name SSL policy name.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 1.2(1)
This command was changed to add the following subcommands:
• session-cache size size
• timeout session timeout [absolute]

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English