Cisco Catalyst 6500 Series Command Reference

2-86
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
snmp-server enable
snmp-server enable
To configure the SNMP traps and informs, use the snmp-server enable command. Use the no form of
this command to disable SNMP traps and informs.
snmp-server enable {informs | traps {ipsec | isakmp | snmp | {ssl-proxy [cert-expiring]
[oper-status]}}}
no snmp-server enable {informs | traps {ipsec | isakmp | snmp | {ssl-proxy [cert-expiring]
[oper-status]}}}
Syntax Description
Defaults This command has no default setting.
Command Modes Global configuration
Command History
Examples This example shows how to enable SNMP informs:
ssl-proxy (config)# snmp-server enable informs
ssl-proxy (config)#
This example shows how to enable SSL-proxy traps:
ssl-proxy (config)# snmp-server enable traps ssl-proxy
ssl-proxy (config)#
This example shows how to enable SSL-proxy notification traps:
ssl-proxy (config)# snmp-server enable traps ssl-proxy cert-expiring oper-status
ssl-proxy (config)#
informs Enables SNMP informs.
traps Enables SNMP traps.
ipsec Enables IPsec traps.
isakmp Enables ISAKMP traps.
snmp Enables SNMP traps.
ssl-proxy Enables SNMP SSL proxy notification traps.
cert-expiring (Optional) Enables SSL proxy certificate-expiring notification traps.
oper-status (Optional) Enables SSL proxy operation-status notification traps.
Release Modification
SSL Services Module
Release 2.1(1)
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English