Cisco Catalyst 6500 Series Command Reference

2-90
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
ssl-proxy mac address
ssl-proxy mac address
To configure a MAC address, use the ssl-proxy mac address command.
ssl-proxy mac address mac-addr
Syntax Description
Defaults This command has no default settings.
Command Modes Global configuration
Command History
Usage Guidelines Enter the MAC address in this format: H.H.H.
Examples This example shows how to configure a MAC address:
ssl-proxy (config)# ssl-proxy mac address 00e0.b0ff.f232
ssl-proxy (config)#
Related Commands show ssl-proxy mac address
mac-addr MAC address; see the “Usage Guidelines” section for additional
information.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English