Cisco Catalyst 6500 Series Command Reference

2-82
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
show ssl-proxy status
show ssl-proxy status
To display information about the SSL Services Module proxy status, use the show ssl-proxy status
command.
show ssl-proxy status [fdu | ssl | tcp]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display the status of the SSL Services Module:
ssl-proxy# show ssl-proxy status
FDU cpu is alive!
FDU cpu utilization:
% process util : 0 % interrupt util : 0
proc cycles : 0x2DB3980C int cycles : 0x2ADACD71
total cycles: 0x4E75127FCEA4
% process util (5 sec) : 0 % interrupt util (5 sec) : 0
% process util (1 min) : 0 % interrupt util (1 min): 0
% process util (5 min) : 0 % interrupt util (5 min) : 0
fdu (Optional) Displays the FDU status.
ssl (Optional) Displays the SSL status.
tcp (Optional) Displays the TCP status.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 1.2(1)
The output of the show ssl-proxy status command was changed to
include statistics that are displayed at a 5-second, 1-minute, and
5-minute traffic rate for CPU utilization.
SSL Services Module
Release 3.1(1)
This command was changed to add the following keywords:
• fdu
• ssl
• tcp

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English