Cisco Catalyst 6500 Series Command Reference

2-67
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
show ssl-proxy context
show ssl-proxy context
To display context information, use the show ssl-proxy context command.
show ssl-proxy context [name]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display all context information on the SSL Services Module:
ssl-proxy# show ssl-proxy context
Total number of contexts : 2
Context Name VRF Num Proxies
------------ --- -----------
Default 2
c1 200
This example shows how to display specific context information on the SSL Services Module:
ssl-proxy# show ssl-proxy context Default
Context id : 0
Number of proxies : 2
Num max conns allowed : 65536
Context 'Default' has the following service(s) configured..
s2
s3
ssl-proxy#
name (Optional) Name of the context.
Release Modification
SSL Services Module
Release 3.1(1)
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English