Cisco Catalyst 6500 Series Command Reference

2-45
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
policy tcp
policy tcp
To enter the proxy policy TCP configuration submode, use the policy tcp command. In proxy-policy
TCP configuration submode, you can define the TCP policy templates.
policy tcp tcp-policy-name
Syntax Description
Defaults The defaults are as follows:
• buffer-share rx is 32768 bytes.
• buffer-share tx is 32768 bytes.
• delayed-ack-threshold is 2.
• delayed-ack-timeout is 200 seconds.
• mss is 1460 bytes.
• nagle is enabled.
• timeout syn is 75 seconds.
• timeout reassembly is 60 seconds.
• timeout inactivity is 600 seconds.
• timeout fin-wait is 600 seconds.
• tos carryover is disabled.
Command Modes Context subcommand mode
Command History
tcp-policy-name TCP policy name.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 1.2(1)
This command was changed to add the timeout reassembly time
subcommand.
SSL Services Module
Release 2.1(4)
This command was changed to add the tos carryover subcommand.
SSL Services Module
Release 3.1(1)
The policy tcp command (entered in context subcommand mode)
replaces the ssl-proxy policy tcp command (entered in global
subcommand mode).
This command was changed to add the following submode commands:
• forced-ack
• nagle

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English