Cisco Catalyst 6500 Series - Configuring the Default Route

2-98
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
standby delay minimum reload
Examples This example shows how to set the minimum delay to 30 seconds and the delay after the first reload to
120 seconds:
ssl-proxy(config)# interface ssl-proxy 0.100
ssl-proxy (config-subif)# standby delay minimum 30 reload 120
ssl-proxy (config-subif)#
Related Commands show standby delay
standby preempt
standby timers