Cisco Catalyst 6500 Series Command Reference

2-102
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
standby mac-address
In an APPN network, an end node is typically configured with the MAC address of the adjacent network
node. Use the standby mac-address command in the routers to set the virtual MAC address to the value
that is used in the end nodes.
Examples This example shows how to configure HSRP group 1 with the virtual MAC address:
ssl-proxy (config-subif)# standby 1 mac-address 4000.1000.1060
ssl-proxy (config-subif)#
Related Commands show standby
standby version

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English