Cisco Catalyst 6500 Series Command Reference

2-24
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
debug ssl-proxy
Command History
Usage Guidelines The content type includes the following values:
• detail—content detail
• error—content error
• ipc—content ipc
• module module—module to be debugged; module includes the following values:
– fdu—fdu cpu
– ssl1—ssl1 cpu
– tcp1—tcp1 cpu
• rewriting—content rewriting
• scanning—content scanning
The fdu type includes the following values:
• cli—Debugs the FDU CLI.
• hash—Debugs the FDU hash.
• ipc —Debugs the FDU IPC.
• trace—Debugs the FDU trace.
The pki type includes the following values:
• certs—Debugs the certificate management.
• events—Debugs events.
• history—Debugs the certificate history.
• ipc—Debugs the IPC messages and buffers.
• key—Debugs key management.
The ssl type includes the following values:
• alert—Debugs the SSL alert events.
• error—Debugs the SSL error events.
• handshake—Debugs the SSL handshake events.
• pkt—Debugs the received and transmitted SSL packets.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
SSL Services Module
Release 3.1(1)
This command was changed to add the following keywords:
• content type
• flash
• health-probe
• module module
• vlan

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English