Cisco Catalyst 6500 Series - Setting the Firewall Mode

2-48
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
policy tcp
This example shows how to define the maximum size for the receive buffer configuration:
ssl-proxy (config-ctx-tcp-policy)# buffer-share rx 16384
ssl-proxy (config-ctx-tcp-policy)#
This example shows how to define the maximum size for the transmit buffer configuration:
ssl-proxy (config-ctx-tcp-policy)# buffer-share tx 13444
ssl-proxy (config-ctx-tcp-policy)#
This example shows how to define the maximum size for the TCP segment:
ssl-proxy (config-ctx-tcp-policy)# mss 1460
ssl-proxy (config-ctx-tcp-policy)#
This example shows how to define the initial connection (SYN)-timeout value:
ssl-proxy (config-ctx-tcp-policy)# timeout syn 5
ssl-proxy (config-ctx-tcp-policy)#
This example shows how to define the reassembly-timeout value:
ssl-proxy (config-ctx-tcp-policy)# timeout reassembly 120
ssl-proxy (config-ctx-tcp-policy)#
This example shows how to carryover the ToS value to all packets within a flow:
ssl-proxy (config-ctx-tcp-policy)# tos carryover
ssl-proxy (config-ctx-tcp-policy)#
Related Commands show ssl-proxy policy