Cisco Catalyst 6500 Series - Page 76

2-50
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
policy url-rewrite
clearport port-number—(Optional) Specifies the port portion of the URL link that is to be rewritten;
valid values are from 1 to 65535.
sslport port-number—(Optional) Specifies the port portion of the URL link that is to be written; valid
values are from 1 to 65535.
Enter the no form of the command to remove the policy.
Examples This example shows how to enter the URL rewrite configuration submode for the test1 policy:
ssl-proxy(config)# ssl-pro context s1
ssl-proxy(config-context)# ssl-proxy policy url-rewrite test1
ssl-proxy(config-ctx-url-rewrite-policy#
This example shows how to define the URL rewrite policy for the test1 policy:
ssl-proxy(config)# ssl-pro context s1
ssl-proxy(config-context)# ssl-proxy policy url-rewrite test1
ssl-proxy(config-ctx-url-rewrite-policy# www.cisco.com clearport 80 sslport 443
redirectonly
ssl-proxy(config-ctx-url-rewrite-policy#
This example shows how to delete the URL rewrite policy for the test1 policy:
ssl-proxy(config)# ssl-pro context s1
ssl-proxy(config-context)# ssl-proxy policy url-rewrite test1
ssl-proxy(config-ctx-url-rewrite-policy# no www.cisco.com clearport 80 sslport 443
redirectonly
ssl-proxy(config-ctx-url-rewrite-policy#
Related Commands show ssl-proxy policy