Cisco Catalyst 6500 Series Command Reference

2-58
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
service client
Examples This example shows how to enter the client proxy-service configuration submode:
ssl-proxy (config)# ssl-proxy context s1
ssl-proxy (config-context)# service S7 client
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the certificate for the specified SSL-proxy services:
ssl-proxy (config-ctx-ssl-proxy)# certificate rsa general-purpose trustpoint tp1
ssl-proxy (config-ctx-ssl-proxy)#
These examples show how to set a specified command to its default value:
ssl-proxy (config-ctx-ssl-proxy)# default certificate
ssl-proxy (config-ctx-ssl-proxy)# default inservice
ssl-proxy (config-ctx-ssl-proxy)# default nat
ssl-proxy (config-ctx-ssl-proxy)# default server
ssl-proxy (config-ctx-ssl-proxy)# default virtual
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a virtual IP address for the specified virtual server:
ssl-proxy (config-ctx-ssl-proxy)# virtual ipaddr 207.59.100.20 protocol tcp port 443
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the SSL policy for the specified virtual server:
ssl-proxy (config-ctx-ssl-proxy)# virtual policy ssl sslpl1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the TCP policy for the specified virtual server:
ssl-proxy (config-ctx-ssl-proxy)# virtual policy tcp tcppl1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a clear-text web server for the SSL Services Module to forward
the decrypted traffic:
ssl-proxy (config-ctx-ssl-proxy)# server ipaddr 207.50.0.50 protocol tcp port 80
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a TCP policy for the given clear-text web server:
ssl-proxy (config-ctx-ssl-proxy)# server policy tcp tcppl1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a NAT pool for the client address that is used in the server
connection of the specified service SSL offload:
ssl-proxy (config-ctx-ssl-proxy)# nat client NP1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to enable a NAT server address for the server connection of the specified
service SSL offload:
ssl-proxy (config-ctx-ssl-proxy)# nat server
ssl-proxy (config-ctx-ssl-proxy)#
Related Commands show ssl-proxy service

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English