Cisco Catalyst 6500 Series - Page 99

2-73
Catalyst 6500 Series Switch SSL Services Module Command Reference
OL-9105-01
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
show ssl-proxy policy
6 "g:"
7 "h:"
8 "i:"
9 "j:"
10 "k:"
11 "l:"
12 "m:"
13 "n:"
Usage count of this policy: 0
ssl-proxy#
This example shows how to display policy information about a specific SSL policy that is configured on
the SSL Services Module:
ssl-proxy# show ssl-proxy policy ssl ssl-policy1
No context name provided, assuming context 'Default'...
Cipher suites: (None configured, default ciphers included)
rsa-with-rc4-128-md5
rsa-with-rc4-128-sha
rsa-with-des-cbc-sha
rsa-with-3des-ede-cbc-sha
SSL Versions enabled:SSL3.0, TLS1.0
close protocol: default (close_notify sent but not expected from peer)
Session Cache:enabled
Session timeout: 72000 seconds
Renegotiation timeout: 100 seconds
Handshake timeout not configured (never times out)
TLS Rollback: default (version number rollback not allowed)
No. of policy users : 0
ssl-proxy#
This example shows how to display policy information about a specific TCP policy that is configured on
the SSL Services Module:
ssl-proxy# show ssl-proxy policy tcp tcp-policy1
No context name provided, assuming context 'Default'...
MSS 1460
SYN timeout 75
Idle timeout 600
FIN wait timeout 75
Reassembly timeout 60
Persist timeout 0
Rx Buffer Share 32768
Tx Buffer Share 65536
TOS Carryover Disabled
Delayed ACK timer 200
Delayed ACK Threshold 2
Nagle algorithm Enabled
Forced ACK Enabled
No. of policy users : 0
ssl-proxy#