To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst C3850 Series and is the answer not in the manual?
General| Max Stacking Units | 9 |
|---|---|
| Layer Support | Layer 2 and Layer 3 |
| RAM | 4 GB |
| Flash Memory | 4 GB |
| Series | Catalyst 3850 |
| Power Supply Options | AC or DC |
| Software | Cisco IOS XE |
| Operating Temperature | 32 to 113°F (0 to 45°C) |
| Ports | 12, 24, or 48 x 10/100/1000 Ethernet ports |
| Uplink Interfaces | Optional 10G uplinks |
Details the various Catalyst 3850 switch models and their specifications.
Describes the components and connectors found on the front of the switch.
Details the components and connectors located on the rear of the switch.
Covers initial setup considerations and safety warnings before installing the switch.
Details the procedures for mounting and installing the switch in various environments.
Introduces the types and capabilities of network modules for the switch.
Provides safety warnings and procedures for installing network modules.
Explains how to install SFP and SFP+ modules into network modules.
Describes the different power supply modules supported by the switch.
Guides on configuring the switch via its web-based graphical interface.
Guides on connecting to the switch via console or USB and managing drivers for CLI access.
Resolving issues related to cables, ports, link status, and device connections.
Resolving performance issues, IP address conflicts, and stack member failures.
