Cisco Catalyst C3850 Series User Manual

APPENDIX A
Technical Specifications
• Environmental and Physical Specifications, on page 113
• Specifications for the Power Supplies, Switches, and Fan, on page 115
Environmental and Physical Specifications
This table describes the environmental specifications.
Table 31: Environmental Specifications for the Switch
Environmental Ranges
23 to 113°F (–5 to 45°C)Operating temperature
14
–40 to 158°F (–40 to 70°C)Storage temperature
5 to 95% (noncondensing)Relative humidity
Up to 10,000 ft (3000 m)Operating altitude
Up to 15,000 ft (4500 m)Storage altitude
14
Minimum ambient temperature for cold start is 32°F (0°C)
This table describes the environmental specifications.
Table 32: Environmental Specifications for the Power Supplies
Environmental Ranges
AC power supply: 23 to 113°F (–5 to 45°C)
DC power supply: 23 to 131°F (–5 to 55°C)
Operating temperature
–40 to 158°F (–40 to 70°C)Storage temperature
10 to 95% (noncondensing)Relative humidity
Catalyst 3850 Switch Hardware Installation Guide
113OL-26779-05

Cisco Catalyst C3850 Series Specifications

General

Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
RAM	4 GB
Flash Memory	4 GB
Series	Catalyst 3850
Power Supply Options	AC or DC
Software	Cisco IOS XE
Operating Temperature	32 to 113°F (0 to 45°C)
Ports	12, 24, or 48 x 10/100/1000 Ethernet ports
Uplink Interfaces	Optional 10G uplinks