Cisco Catalyst C3850 Series User Manual

Figure 74: Obtaining the IP Address
It may take up to three mins. You must complete the Day 0 setup through the web UI before using the device
terminal.
Step 4 Launch a web browser on the PC and enter the device IP address (https://192.168.1.1) in the address
bar.
Step 5 Enter the Day 0 username webui and password serial number of the switch. Note that the serial
number is case sensitive.
The Day 0 username and password depends on the software version of your switch.
For Cisco Catalyst switches running software versions earlier than Cisco IOS XE Fuji 16.9.x, the
default username is webui; the default password is the serial number of the switch chassis.
For Cisco Catalyst switches running software version Cisco IOS XE Amsterdam 17.1.x, the default
username is webui; the default password is cisco.
Note
What to do next
Create a user account.
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-0590
Configuring the Switch
Connecting to the Switch

Cisco Catalyst C3850 Series Specifications

General

Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
RAM	4 GB
Flash Memory	4 GB
Series	Catalyst 3850
Power Supply Options	AC or DC
Software	Cisco IOS XE
Operating Temperature	32 to 113°F (0 to 45°C)
Ports	12, 24, or 48 x 10/100/1000 Ethernet ports
Uplink Interfaces	Optional 10G uplinks