Cisco Catalyst C3850 Series User Manual

Available PoEDefault Power SupplyModels
435 WPWR-C1-715WAC
24-port PoE+ switch
48-port PoE+ switch
800 WPWR-C1-1100WAC
48-port full PoE+ switch
24-port Cisco UPOE switch
48-port Cisco UPOE switch
Table 14: Available PoE with DC Power Supply
Available PoENumber of Power SuppliesModels
220 W124-port PoE+ switch
660 W2
185 W
148-port PoE+ switch
625 W2
220 W
124-port Cisco UPOE switch
660 W2
185 W
148-port Cisco UPOE switch
625 W2
Table 15: Switch Power Supply Requirements for PoE, PoE+, and Cisco UPoE
48-Port Switch
11
24-Port SwitchPoE Option
These are the combinations of
power supplies:
• (1) 1100 W
• (1) 715 W + (1) 715 W
(1) 715 WPoE (up to 15.4 per port)
These are the combinations of
power supplies:
• (1) 1100 W + (1) 715 W
• (2) 1100 W
These are the combinations of
power supplies:
• (1) 1100 W
• (1) 715 W + (1) 715 W
PoE+ (up to 30 W per ports)
Catalyst 3850 Switch Hardware Installation Guide
27OL-26779-05
Product Overview
Power Supply Modules

Cisco Catalyst C3850 Series Specifications

General

Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
RAM	4 GB
Flash Memory	4 GB
Series	Catalyst 3850
Power Supply Options	AC or DC
Software	Cisco IOS XE
Operating Temperature	32 to 113°F (0 to 45°C)
Ports	12, 24, or 48 x 10/100/1000 Ethernet ports
Uplink Interfaces	Optional 10G uplinks