Cisco Catalyst C9200-48T User Manual

APPENDIX A
Technical Specifications
• Environmental and Physical Specifications, on page 73
• Specifications for the Power Supplies and Fans, on page 77
Environmental and Physical Specifications
This table describes the environmental specifications.
Table 15: Environmental Specifications for the Switch
Environmental Ranges
23 to 113°F (–5 to 45°C)Operating temperature
2
–40 to 158°F (–40 to 70°C)Storage temperature
5 to 90% (noncondensing)Relative humidity
Up to 10,000 ft (3000 m)Operating altitude
Up to 15,000 ft (4500 m)Storage altitude
2
Minimum ambient temperature for cold start is 32°F (0°C)
This table describes the environmental specifications.
Table 16: Environmental Specifications for the Power Supplies
Environmental Ranges
23°F to 113°F (–5°C to 45°C) up to 5000 feet (1500m)
23°F to 104°F (–5°C to 40ºC) up to 10,000 feet
(3000m)
Operating temperature
–40 to 158°F (–40 to 70°C)Storage temperature
10 to 90% (noncondensing)Relative humidity
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
73

Cisco Catalyst C9200-48T Specifications

General

Total 10/100/1000 or Multigigabit copper ports	48 x 10/100/1000
Switching Capacity	176 Gbps
DRAM	4 GB
Flash	16 GB
PoE Support	No
MTBF	1, 000, 000 hours
Power Device	Internal power supply
Rack Mountable	Yes
Product Type	Layer 3 Switch
Uplink Ports	4 x 10 Gigabit Ethernet
Input Voltage	AC 120/230 V
Authentication Method	Secure Shell (SSH), RADIUS, TACACS+
Operating Temperature	0 to 45°C