Cisco CISCO851-K9 - 851 Integrated Services Router - Cisco IOS Software Basic Skills; Configuring Router from a PC

A-1
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
OL-5332-01
APPENDIX
A
Cisco IOS Software Basic Skills
Understanding how to use Cisco IOS software can save you time when you are configuring your router.
If you need a refresher, take a few minutes to read this appendix.
This appendix contains the following sections:
• Configuring the Router from a PC
• Understanding Command Modes
• Getting Help
• Enable Secret Passwords and Enable Passwords
• Entering Global Configuration Mode
• Using Commands
• Saving Configuration Changes
• Summary
• Where to Go Next
If you are already familiar with Cisco IOS software, go to one of the following chapters:
• Chapter 1, “Basic Router Configuration”
• Chapter 2, “Sample Network Deployments”
• One of the configuration topic chapters described in Chapter 11, “Additional Configuration
Options.”
Configuring the Router from a PC
You can configure your router from a PC connected through the console port using terminal emulation
software. The PC uses this software to send commands to your router.
Table A-1 lists some common
types of this software, which are based on the type of PC you are using.