Cisco CISCO851-K9 - 851 Integrated Services Router User Manual

1-2
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
OL-5332-01
Chapter 1 Basic Router Configuration
Viewing the Default Configuration
Viewing the Default Configuration
When you first boot up your Cisco router, some basic configuration has already been performed. All of
the LAN and WAN interfaces have been created, console and VTY ports are configured, and the inside
interface for Network Address Translation has been assigned. Use the show
running-config command
to view the initial configuration, as shown in
Example 1-1.
Example 1-1 Cisco 851 Default Configuration on Startup
Router# show running-config
Building configuration...
Current configuration : 1090 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
Cisco 871 Fast Ethernet LAN FE0–FE3
Fast Ethernet WAN FE4
Wireless LAN LEFT, RIGHT/PRIMARY
USB 1–0
Cisco 857 Fast Ethernet LAN LAN (top), FE0–FE3 (bottom)
ATM WA N ADSLoPOTS
Wireless LAN (no label)
Cisco 876 Fast Ethernet LAN LAN (top), FE0–FE3 (bottom)
ATM WA N ADSLoISDN
Wireless LAN LEFT, RIGHT/PRIMARY
BRI ISDN S/T
Cisco 877 Fast Ethernet LAN LAN (top), FE0–FE3 (bottom)
ATM WA N ADSLoPOTS
Wireless LAN LEFT, RIGHT/PRIMARY
Cisco 878 Fast Ethernet LAN FE0–FE3
ATM WA N G.SHDSL
Wireless LAN LEFT, RIGHT/PRIMARY
BRI ISDN S/T
Table 1-1 Supported Interfaces and Associated Port Labels by Cisco Router (continued)
Router Interface Port Label

Cisco CISCO851-K9 - 851 Integrated Services Router Specifications

General

Brand	Cisco
Model	CISCO851-K9 - 851 Integrated Services Router
Category	Network Router
Language	English