Cisco CRS Series - Page 151

!
address-family ipv4 mdt
!
neighbor 9.9.9.9
remote-as 100
update-source Loopback0
address-family ipv4 unicast
!
address-family vpnv4 unicast
!
address-family ipv4 mdt
!
!
vrf vpn1
rd 1:1
address-family ipv4 unicast
redistribute ospf 1
!
!
!
router ospf 1
vrf vpn1
router-id 2.2.2.2
redistribute bgp 100
area 0
interface Loopback1
!
interface GigabitEthernet0/5/0/0
!
!
!
!
router ospf 100
router-id 1.1.1.1
area 0
interface Loopback0
!
interface TenGigE0/6/0/0
!
!
!
router pim vrf vpn1 address-family ipv4
rp-address 2.2.2.2
log neighbor changes
!
router pim vrf default address-family ipv4
rp-address 1.1.1.1
!
end
PE2:
!
vrf vpn1
address-family ipv4 unicast
import route-target
1:1
!
export route-target
1:1
!
!
!
interface Loopback0
ipv4 address 9.9.9.9 255.255.255.255
!
interface Loopback1
vrf vpn1
ipv4 address 10.10.10.10 255.255.255.255
!
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
141
Implementing Multicast Routing on Cisco IOS XR Software
Configuring IPv4 Multicast VPN: Example