Cisco CRS Series - Page 160

interface tunnel-mte1
static-group 228.1.1.1 2.2.2.1
!
router mld
interface tunnel-mte1
static-group ff3e:0:228::1 2001:2:2:2::1
Profile-10: VRF static P2MP-TE with BGP-AD
!
multicast-routing
mdt source Loopback0
vrf v101
address-family ipv4
mdt static p2mp-te tunnel-mte10
interface all enable
bgp auto-discovery pim
!
!
router igmp
vrf v101
interface tunnel-mte10
static-group 227.101.1.1 101.7.1.1
!
!
Profile-18: Rosen Static P2MP-TE with BGP-AD and PIM signaling
multicast-routing
mdt source Loopback0
vrf v181
address-family ipv4
mdt default p2mp-te static tunnel-mte18
interface all enable
bgp auto-discovery pim
!
address-family ipv6
mdt default p2mp-te static tunnel-mte181
interface all enable
bgp auto-discovery pim
!
!
router pim
vrf v181
address-family ipv4
rpf topology route-policy p2mp-te-default
!
address-family ipv6
rpf topology route-policy p2mp-te-default
!
!
route-policy p2mp-te-default
set core-tree p2mp-te-default
end-policy
!
Profile-16: Rosen Static P2MP-TE with BGP-Ad and BGP signaling
!
multicast-routing
mdt source Loopback0
vrf v161
address-family ipv4
mdt default p2mp-te static tunnel-mte16
interface all enable
bgp auto-discovery pim
!
address-family ipv6
mdt default p2mp-te static tunnel-mte161
interface all enable
bgp auto-discovery pim
!
!
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
150
Implementing Multicast Routing on Cisco IOS XR Software
Configuration Examples for MVPN Profiles