Cisco CRS Series - Page 176

address-family ipv4 unicast
import route-target
1001:10
!
!
!
router pim
vrf A1-Hub-1
address-family ipv4
rpf topology route-policy A1-Hub-Policy
bsr relay vrf A1-Hub-Tunnel
bsr candidate-bsr 201.10.10.201 hash-mask-len 30 priority 4
bsr candidate-rp 201.10.10.201 group-list A1_PE1_RP_grange priority 4 interval 60
auto-rp relay vrf A1-Hub-Tunnel
!
!
!
router pim
vrf A1-Hub-Tunnel
address-family ipv4
!
!
!
multicast-routing
vrf A1-Hub-1
address-family ipv4
log-traps
multipath
rate-per-route
interface all enable
accounting per-prefix
!
!
!
multicast-routing
vrf A1-Hub-Tunnel
address-family ipv4
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
166
Implementing Multicast Routing on Cisco IOS XR Software
Configuring Multicast Hub and Spoke Topology: Example