Cisco CRS Series - Prerequisites for configuring AMT

redistribute connected
!
address-family vpnv4 unicast
!
address-family vpnv6 unicast
!
neighbor 5.5.5.5
remote-as 100
update-source Loopback0
address-family ipv4 unicast
!
address-family vpnv4 unicast
!
address-family vpnv6 unicast
!
!
vrf 250
rd 250:250
address-family ipv4 unicast
redistribute connected
!
address-family ipv4 mvpn
!
!
mpls traffic-eng
interface GigabitEthernet0/0/2/0
!
!
mpls ldp
router-id 1.1.1.1
graceful-restart
mldp
logging internal
!
<all core-facing interfaces>
!
!
multicast-routing
address-family ipv4
nsf
mdt source Loopback0
interface all enable
accounting per-prefix
!
vrf 250
address-family ipv4
mdt mldp in-band-signaling
interface all enable
!
!
router pim
vrf 250
address-family ipv4
rpf topology route-policy mldp-250
rp-address 10.1.250.1
!
!
Partitioned-MDT MP2MP without BGP-AD
vrf 251
address-family ipv4 unicast
import route-target
251:251
!
export route-target
251:251
!
!
!
interface Loopback0
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
184
Implementing Multicast Routing on Cisco IOS XR Software
Configuring LSM based MLDP: Examples