EasyManua.ls Logo

Cisco CRS Series - Page 196

Cisco CRS Series
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
address-family ipv4
mdt partitioned mldp ipv4 mp2mp
interface all enable
!
!
router pim
vrf 251
address-family ipv4
rpf topology route-policy mldp-251
rp-address 10.11.1.1
!
!
Partitioned-MDT MP2MP with BGP-AD
vrf 301
address-family ipv4 unicast
import route-target
301:301
!
export route-target
301:301
!
!
!
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
interface Loopback301
vrf 301
ipv4 address 10.11.51.1 255.255.255.255
!
route-policy mldp-301
set core-tree mldp-partitioned-mp2mp
end-policy
!
router ospf 1
address-family ipv4 unicast
area 0
mpls traffic-eng
interface Loopback0
!
interface Loopback1
!
interface GigabitEthernet0/0/2/0
!
interface GigabitEthernet0/3/2/1
!
interface GigabitEthernet0/3/2/2
!
!
mpls traffic-eng router-id Loopback0
!
router bgp 100
address-family ipv4 unicast
redistribute connected
!
address-family vpnv4 unicast
!
address-family vpnv6 unicast
!
address-family ipv4 mvpn
!
neighbor 5.5.5.5
remote-as 100
update-source Loopback0
address-family ipv4 unicast
!
address-family vpnv4 unicast
!
address-family vpnv6 unicast
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
186
Implementing Multicast Routing on Cisco IOS XR Software
Configuring LSM based MLDP: Examples

Table of Contents

Other manuals for Cisco CRS Series

Related product manuals