Cisco CRS Series - Configuring AMT

!
address-family ipv4 mvpn
!
!
vrf 301
rd 301:301
address-family ipv4 unicast
redistribute connected
!
address-family ipv4 mvpn
!
!
mpls traffic-eng
interface GigabitEthernet0/0/2/0
!
!
mpls ldp
router-id 1.1.1.1
graceful-restart
mldp
logging internal
!
<all core-facing interfaces>
!
!
multicast-routing
address-family ipv4
nsf
mdt source Loopback0
interface all enable
accounting per-prefix
!
vrf 301
address-family ipv4
bgp auto-discovery mldp
mdt partitioned mldp ipv4 mp2mp
interface all enable
!
!
router pim
vrf 301
address-family ipv4
rpf topology route-policy mldp-301
rp-address 10.11.51.1
!
!
Multidirectional Selective Provider Multicast Service Instance mLDP-P2MP with BGP-Advertisement
vrf 401
address-family ipv4 unicast
import route-target
401:401
!
export route-target
401:401
!
!
!
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
interface Loopback401
vrf 401
ipv4 address 10.11.151.1 255.255.255.255
!
route-policy mldp-401
set core-tree mldp-partitioned-p2mp
end-policy
!
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
187
Implementing Multicast Routing on Cisco IOS XR Software
Configuring LSM based MLDP: Examples