Cisco CRS Series - Page 50

◦
multicast-routing vrf vrf_name
◦
address-family ipv4
◦
mdt default mldp ipv4 root-node
For profile 1 (MLDP Rosen), the mdt default mldp ipv4 command and for profile 4/5 (MS- PMSI with
BGP-AD), the mdt partitioned mldp ipv4 mp2mp/p2mp command are configured.
•
Configuring the Route Distinguisher
◦
configure
◦
router bgp AS Number
◦
vrf vrf_name
◦
rd rd_value
•
Configuring Data MDTs (optional)
◦
configure
◦
multicast-routing vrf vrf_name
◦
address-family ipv4
◦
mdt data <1-255>
•
Configuring BGP MDT address family
◦
configure
◦
router bgp AS Number
◦
address-family ipv4 mdt
•
Configuring BGP vpnv4 address family
◦
configure
◦
router bgp AS Number
◦
address-family vpnv4 unicast
•
Configuring BGP IPv4 VRF address family
◦
configure
◦
router bgp AS Number
◦
vrf vrf_name
◦
address-family ipv4 unicast
•
Configuring PIM SM/SSM Mode for the VRFs
◦
configure
◦
router pim
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
40
Implementing Multicast Routing on Cisco IOS XR Software
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support