Configuration Examples for MVPN Profiles 148
Configuration Examples for Inband mLDP profiles 148
Configuration Examples for P2MP-TE profiles 149
Configuration examples for Partitioned mLDP profiles 152
Configuration Examples for Rosen-mGRE profiles 154
Configuration Examples for Rosen mLDP profiles 156
Configuring Multitopology Routing: Example 159
Configuring MVPN Extranet Routing: Example 160
Configuring the Source MVRF on the Receiver PE Router: Example 160
Configuring the Receiver MVRF on the Source PE Router: Example 162
Configuring Multicast Hub and Spoke Topology: Example 165
Hub and Spoke Non-Turnaround Configuration: Example 165
Hub and Spoke with Turnaround: Example 174
Configuring LSM based MLDP: Examples 180
Additional References 190
CHAPTER 3
Implementing Automatic Multicast Routing: 193
Automatic Multicast Tunneling 193
Advantages of AMT 193
Prerequisites for configuring AMT 194
Restrictions for AMT 194
Implementing AMT 195
AMT Message Exchanges 195
AMT Tunnel and Traffic Types 196
Out of Resource mode 196
Enabling AMT 196
Configuring AMT 197
Configuration Examples for Implementing AMT 198
Enabling AMT: Example 199
AMT Maximum Gateway Configuration: Example 199
AMT MTU Configuration: Example 199
AMT TOS Configuration: Example 199
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
viii
Contents
To Next Page
Loading...
