14 On the Set Up GOQAM window, click Apply.
Results:
The system saves the settings for the new RF GoQAM.
The Connectivity tab becomes sensitized.
Note: When you first provision the RF GoQAM, the Connectivity tab is
accessible only after you click Apply or Save from the Set Up GOQAM window.
Thereafter, the Connectivity tab is accessible for viewing or modification.
15 Click the Connectivity tab. The Set Up RF GOQAM window opens with the
Connectivity tab to the forefront displaying the Connectivity configuration
fields.
16 Select the RF GoQAM input port you want to connect to the network.
17 Select the device you want to connect to the RF GoQAM in the Connect To fields
of the Connectivity tab; then, click Save. The QAM List updates to include the RF
GoQAM.
Notes:
The fields available in the Connect To panel of the Connectivity tab vary
according to which device is selected.
See the Connectivity field descriptions, earlier in this section, for descriptions
of each field.
Refer to the Digital Network Control System Online Help for your system
release for more details about required DNCS procedures.
18 When you have completed provisioning the RF GoQAM, go to Operating the RF
Modulator (on page 77).
To Next Page
Loading...
General