Cisco GoQAM - Page 82

Chapter 4 Provision the IF GoQAM
66 4004834 Rev D
8 To add an RF Out Port, click Add. An RF Output Port window similar to the
following opens.
Important! For a description of the fields in the RF Output Port window, go to
the RF Output Ports section in Set Up UpConverter Basic Parameters (on page
68).
9 Enter correct information in the RF Output Port window and move an Available
Hub to the Selected Hubs field.
10 Do you want to view or edit an RF Output port?
 If yes, go to step 11.
 If no, go to step 13.