Cisco III - Supervisor Engine III User Manual

2-134
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
EPLD_STATUS_OPEN Messages
Error Message %EPLD_STATUS_OPEN-4-ERROR_OPEN: %Error: Can’t open [chars]
Explanation
The system is unable to open the specified file.
Recommended Action Ensure that the filename is correct. Enter the dir command to verify the
filename.
Error Message %EPLD_STATUS_OPEN-4-ERROR_READ: %Error: status file [chars] read
failed
Explanation
An unknown error occurred while the system was reading the status program file to a
local buffer.
Recommended Action Delete and recopy the file. If this message recurs, copy the message exactly as
it appears on the console or in the system log. Research and attempt to resolve the issue using the
tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and
utilities will supply clarifying information. Search for resolved software issues using the Bug
Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case
with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message %EPLD_STATUS_OPEN-4-ERROR_REMOVE: %Error: status file [chars] remove
failed
Explanation
An unknown error occurred while the system was removing the status program file from
nonvolatile memory.
Recommended Action Delete the file manually. If this message recurs, copy the message exactly as it
appears on the console or in the system log. Research and attempt to resolve the issue using the tools
and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities
will supply clarifying information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %EPLD_STATUS_OPEN-4-ERROR_SIZE: %Error: Bad file size [chars]
Explanation
The file is too small or too large for a programming status file.
Recommended Action Enter the dir command, and determine the size of the file. Retry the operation.

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English