2-214
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
RP_MLP Messages
assistance, open a case with the Technical Assistance Center using the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
Error Message %RPF-3-RTAVLINSERT: Error inserting a new rpf entry into the multicast
rpf tree
Explanation
An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. Research and attempt to resolve the error using the Output Interpreter at
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support
command to gather data that may help identify the nature of the error. Also perform a search of the
Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require
assistance, open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
RP_MLP Messages
This section contains Route Processor Multilink Point-to-Point Protocol (RP_MLP) messages.
RP_MLP-4
Error Message %RP_MLP-4-DLFIONELINKSUPPORT: Only ONE link should be configured for
dLFI bundle!!
Explanation
The system attempted to configure more than one link for the Distributed Link
Fragmentation and Interleaving (dLFI) bundle interface. The dLFIoFR and the dLFIoATM do not
support configuring more than one link.
Recommended Action No action is required.
RUNCFGSYNC Messages
This section contains Auto-Running Configuration Synchronization (RUNCFGSYNC) messages.
RUNCFGSYNC-6
Error Message %RUNCFGSYNC-6-HASRMSTATE: [chars]
Explanation
The high availability (HA) single router mode has changed state. Additional details are
provided in the error message text.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General