2-150
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
IPFAST Messages
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
IPC-5
Error Message %IPC-5-WATERMARK:[dec] messages pending in [hex] for the port [chars]
[hex].[hex]
Explanation
A particular IPC port is overused. An application is not draining packets quickly, which
suggests that the CPU might be busy. [dec] is the number of messages pending in the IPC to be
processed by the application. [chars] is the IPC port name. The first [hex] is the IPC port number,
the second [hex] is the IPC seat number, and the third [hex] is the IPC index.
Recommended Action No action is required.
IPFAST Messages
This section contains IP fast-switching (IPFAST) messages.
IPFAST-2
Error Message %IPFAST-2-FASTPORTCREATEERR: Attempt to create [chars] failed after
[dec] retries (last error:[chars])
Explanation
The line card attempted to create a port to the route processor but has failed after a few
retries. This condition might result in the CEF becoming disabled on the line card.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
To Next Page
Loading...
Need help?
General