Cisco III - Supervisor Engine III User Manual

2-230
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
SIP600 Messages
SIP600-4
Error Message %SIP600-4-INVALID_STATID: PXF:Invalid-Statid ([dec]) for vc [int]
under interface [int]
Explanation
The OSM encountered an internal error while setting up the statistics report subsystem.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SIP600-4-SIP10G_PXF_IRAM_PARITY_ERROR: Correcting a PXF instruction
error.
Explanation
This is a Parallel Express Forwarding (PXF) error message that indicates a detection and
correction of a typically rare event. If the error is persistent, it may indicate faulty hardware.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. Research and attempt to resolve the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,
open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
SIP600-6
Error Message %SIP600-6-NULLQID: PXF([dec]):Null-QID ([chars]) [int] packets
dropped.
Explanation
A Catalyst 6500 series switch or a Cisco 7600 series router line card encountered an
invalid queue. A packet has been dropped. The packet will be counted in the null queue statistics,
and packet traffic should continue normally.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English