Cisco III - Supervisor Engine III User Manual

2-46
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
C7600_SSC600 Messages
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %C7600_SSC600-3-DPTX_QDR: Error clearing QDR queue [dec].
Explanation
One of the QDR queues did not clear completely.
Recommended Action If this message recurs, copy the message exactly as it appears on the console
or in the system log. Research and attempt to resolve the issue using the tools and utilities provided
at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %C7600_SSC600-3-SINGLE_SPA_MODE: Module will use only bay [dec]. Bay
[dec] is shut.
Explanation
The 7600-SSC-400 is in single-SPA mode.
Recommended Action This message is informational. No action is required.
Error Message %C7600_SSC600-3-SSC_BAY_SHUT: Bay [dec] is shutdown because
7600-SSC-400 is in single-spa-mode
Explanation
Specified bay is shut down. In single-SPA mode, only one bay is active.
Recommended Action Refer to IPSEC SPA documentation for information about single-SPA mode.
Error Message %C7600_SSC600-3-SW_ERROR: NULL
Explanation
This condition arises when there is a problem in internal software coding; it should not
arise under normal operation.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English