Power On the Device, on page 33.Pre-Configuration
(Optional) Change Management Network Settings at the CLI, on page 34.FTD CLI
Log Into FDM, on page 36.Firepower Device
Manager
Complete the Initial Configuration, on page 36Firepower Device
Manager
Log Into CDO with Cisco Secure Sign-On, on page 41.Cisco Defense
Orchestrator
Onboard the device using a registration key or credentials (Onboard the FTD
to CDO, on page 42).
Cisco Defense
Orchestrator
Register with the registration key (Onboard the FTD to CDO, on page 42). If
you onboard using credentials, you do not need to log into FDM.
Firepower Device
Manager
(Optional) Obtain feature licenses (Configure Licensing, on page 49).Cisco Commerce
Workspace
Generate a license token (Configure Licensing, on page 49).Smart Software
Manager
Register the device with the Smart Licensing Server (Configure Licensing, on
page 49).
Cisco Defense
Orchestrator
Configure the Device in CDO, on page 53Cisco Defense
Orchestrator
How Cisco Defense Orchestrator Works with Firepower Threat
Defense
CDO and FDM Co-Management
After you complete initial configuration in FDM to establish internet connectivity and configure a basic
network policy, you can onboard the device to CDO. After you onboard the device to CDO, you can continue
to use FDM as needed. You can choose whether to accept out-of-band changes in CDO on a case-by-case
basis.
Secure Device Connector (SDC)
All communication between CDO and the devices it manages passes through an SDC. CDO and the devices
it manages do not communicate directly.
SDCs can be deployed in the cloud or in your network using the following methods:
Cisco Firepower 1010 Getting Started Guide
26
Firepower Threat Defense Deployment with CDO
How Cisco Defense Orchestrator Works with Firepower Threat Defense
To Next Page
Loading...
Need help?
General