Cisco ME 3400 - Page 302

2-274
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
match ip dscp
Examples This example shows how to create a class map called inclass, which matches all the incoming traffic with
DSCP values of 10, 11, and 12:
Switch(config)# class-map match-any in-class
Switch(config-cmap)# match ip dscp 10 11 12
Switch(config-cmap)# exit
You can verify your settings by entering the show class-map privileged EXEC command.
Related Commands Command Description
class-map Creates a class map to be used for matching packets to the class whose name
you specify.
show class-map Displays quality of service (QoS) class maps.