2-445
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2    Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show interfaces
Interface Status         Protocol Description
Gi0/2  up             down     Connects to Marketing
This is an example of output from the show interfaces etherchannel command when port channels are 
configured on the switch:
Switch# show interfaces etherchannel
----
Port-channel1:
Age of the Port-channel   = 03d:20h:17m:29s
Logical slot/port   = 10/1           Number of ports = 0
GC                  = 0x00000000      HotStandBy port = null
Port state          = Port-channel Ag-Not-Inuse
Port-channel2:
Age of the Port-channel   = 03d:20h:17m:29s
Logical slot/port   = 10/2           Number of ports = 0
GC                  = 0x00000000      HotStandBy port = null
Port state          = Port-channel Ag-Not-Inuse
Port-channel3:
Age of the Port-channel   = 03d:20h:17m:29s
Logical slot/port   = 10/3           Number of ports = 0
GC                  = 0x00000000      HotStandBy port = null
Port state          = Port-channel Ag-Not-Inuse
This is an example of output from the show interfaces private-vlan mapping command when the 
private-VLAN primary VLAN is VLAN 10 and the secondary VLANs are VLANs 501 and 502:
Switch# show interfaces private-vlan mapping
Interface Secondary VLAN Type
--------- -------------- -----------------
vlan10    501            isolated
vlan10    502            community
This is an example of output from the show interfaces stats command for a specified VLAN interface.
Switch# show interfaces vlan 1 stats
Switching path    Pkts In   Chars In   Pkts Out  Chars Out
        Processor    1165354  136205310     570800   91731594
      Route cache          0          0          0          0
            Total    1165354  136205310     570800   91731594
This is an example of partial output from the show interfaces status command. It displays the status of 
all interfaces.
Switch# show interfaces status
Port      Name               Status       Vlan       Duplex  Speed Type
Fa0/1                        connected    1          a-full  a-100 10/100BaseTX
Fa0/2                        connected    1          a-full  a-100 10/100BaseTX
Fa0/3                        notconnect   1            auto   auto 10/100BaseTX
Fa0/4                        disabled     1            auto   auto 10/100BaseTX
Fa0/5                        disabled     1            auto   auto 10/100BaseTX
Fa0/6                        disabled     1            auto   auto 10/100BaseTX
Fa0/7                        disabled     1            auto   auto 10/100BaseTX
Fa0/8                        disabled     1            auto   auto 10/100BaseTX
Fa0/9                        disabled     1            auto   auto 10/100BaseTX
Fa0/10                       disabled     1            auto   auto 10/100BaseTX
Fa0/11                       disabled     1            auto   auto 10/100BaseTX
Fa0/12                       disabled     1            auto   auto 10/100BaseTX
Fa0/13                       disabled     1            auto   auto 10/100BaseTX
Fa0/14                       disabled     1            auto   auto 10/100BaseTX
Fa0/15                       disabled     1            auto   auto 10/100BaseTX
Fa0/16                       disabled     1            auto   auto 10/100BaseTX